Приборы для резьбы Buttress
Прибор №1211
Наименование прибора: Buttress Run-out Gauge
Тип резьбы: Buttress Casing
Диапазон диаметров: все внешние резьбы от 4" и более
Тип индикатора: 0-15-0
Дискретность индикатора: 0.0005"
Диапазон измерений: 1/8"
Anvil Position: The body of this gauge is designed to
remain parallel with the threads on the pipe while in
use. It utilizes two tungsten carbide contacts that fit
in the threads of the pipe to make a more steady and solid
fit of the gauge into the pipe thread.
Description:
The 1211 Buttress Run-Out Gauge is used to check the threading
tool run-out on external API Buttress Casing thread. The
body is stabilized in the thread grooves through the two
specially designed Tungsten Carbide contacts, allowing
the measuring point to record a true run-out reading of
the thread root near the triangle (Omega) marking.
Прибор №1211-A
Наименование прибора: Buttress Run-out Gauge
Тип резьбы: Buttress Tubing (0-45 градусов)
Диапазон диаметров: Все внешние резьбы от 4 1/2" и более
Тип индикатора: 0-15-0
Дискретность индикатора: 0.0005"
Диапазон измерения: 1/8”
Anvil Position: The body of this gauge is designed to
remain parallel with the threads on the pipe while in
use. It utilizes four tungsten carbide contacts that engage
the thread grooves to make a more steady and solid fit
of the gauge into the pipe thread.
Description:
The 1211-A Buttress Run-Out Gauge is designed to determine
threading tool run-out on Improved Buttress Tubing (0-45
Degree). It is stabilized in the thread by a specially
designed body equipped with three .036 Diameter Tungsten
Carbide contacts. While in use, the measuring point can
then remain in the root of the thread for an accurate
run-out reading.
Прибор №1211-M
Наименование прибора: Buttress Run-out Gauge, Metric
Тип резьбы: Buttress Casing
Диапазон диаметров: все внешние резьбы от 114мм и более
Тип индикатора: 0~50~0, Balanced Dial w/ Revolution Counting
Hand
Дискретность индикатора: 0.01мм
Диапазон измерения: 3мм
Anvil Position: The body of this gauge is designed to
remain parallel with the threads on the pipe while in
use. It utilizes two tungsten carbide contacts that fit
in the threads of the pipe to make a more steady and solid
fit of the gauge into the pipe thread.
Description:
The 1211M Buttress Run-Out Gauge is used to check the
threading tool run-out on external API Buttress Casing
thread. The body is stabilized in the thread grooves through
the two specially designed Tungsten Carbide contacts,
allowing the measuring point to record a true run-out
reading of the thread root near the triangle marking.
Прибор №1211-A/M
Gauge
Type: Buttress Run-out Gauge, Metric
Thread Type: Buttress Tubing (0-45 Degree)
Size Range: All External Threads 114mm & Larger
Dial Type: 0~50~0, Balanced Dial w/ Revolution Counting
Hand
Graduation: 0.01mm
Dial Travel: 3mm
Anvil Position: The body of this gauge is designed to
remain parallel with the threads on the pipe while in
use. It utilizes four tungsten carbide contacts that engage
the thread grooves to make a more steady and solid fit
of the gauge into the pipe thread.
Description:
The 1211-A/M Buttress Run-Out Gauge is designed to determine
threading tool run-out on Improved Buttress Tubing (0-45
Degree). It is stabilized in the thread by a specially
designed body equipped with three .036 Diameter Tungsten
Carbide contacts. While in use, the measuring point can
then remain in the root of the thread for an accurate
run-out reading.
Прибор №5886CM
Gauge
Type: Height Gauge, Metric
Thread Form: API Buttress Casing
Size Range: External and Internal Thread Diameters from
114mm to 339mm
Dial Type: 0~50~0, Balanced w/ Revolution Counting Hand
Graduation: 0.01 mm
Dial Travel: 3 mm minimum
Anvil: Hardened steel, “V” cross section, Dial Face perpendicular
to thread axis. A special feature specifically for Buttress
Casing, is that the measuring contact is located closer
to the back of the anvil. This allows the user to record
height readings closer to the “black thread” area while
always resting on perfectly formed threads.
Description:
The 5886CM is an External Thread Height Gauge used on
External and Internal API Buttress Casing threads ranging
from 114mm to 339mm. By first “zeroing” your height gauge
on the 1233-A setting standard, the product error is read
on the dial. The measurement taken then indicates the
deviation from the API Nominal, not the actual thread
height. This gauge also features a Revolution counting
hand on the indicator and is equipped with a Tungsten
Carbide Ball Point.
Прибор №5886BM
Gauge
Type: Metric Height Gauge, Metric
Thread Form: Improved Buttress Tubing
Size Range: External and Internal Threads in sizes of
89mm to 393mm
Dial Type: 0~50~0, Balanced w/ Revolution Counting Hand
Graduation: 0.01mm
Dial Travel: 3mm minimum
Anvil: Hardened steel, 60 degree V cross section, Dial
Face perpendicular to thread axis. The anvil on the 5886BM
is specially designed for the measuring of Improved Buttress
Tubing ( 0-45 Degree Flank Angles). This special design
utilizes a locator pin and an indented anvil to allow
the 36 Degree Cone Point to rest perfectly at the root
of the thread in order to get the most accurate reading.
Description:
The 5886BM is used only on the external Improved Buttress
Tubing threads. By first “zeroing” your height gauge on
the 1231-E setting standard, the product thread height
error is read on the dial. The measurement taken then
indicates the deviation from the nominal, not the actual
thread height. This gauge also features a Revolution counting
hand on the indicator.
Прибор №5886MB-16
Gauge
Type: Height Gauge, Metric
Thread Form: API Buttress Casing
Size Range: External and Internal Thread Diameters from
406mm to 508mm.
Dial Type: 0~50~0, Balanced w/ Revolution Counting Hand
Graduation: 0.01mm
Dial Travel: 3mm minimum
Anvil: Hardened steel, “V” cross section, specially designed
to keep the measuring axis perpendicular to the pipe axis,
Dial Face perpendicular to thread axis
Description:
The 5886-MB-16 is an External Thread Height Gauge used
only on External and Internal API Buttress Casing threads
ranging from 114mm to 339mm By first “zeroing” your height
gauge on the 1233-SB-16 setting standard, the product
error is read on the dial. The measurement taken then
indicates the deviation from the API Nominal, not the
actual thread height. This gauge also features a Revolution
counting hand on the indicator and is equipped with a
1.82mm diameter Ball Point.
Прибор №5886-GM
Gauge
Type: Ring Groove Height Gauge, Metric
Thread Form: Ring Grooves on Couplings
Dial Type: 0~10~0, Balanced w/ Revolution Counting Hand
Graduation: .01mm
Dial Travel: 3mm minimum
Anvil: Hardened steel, “V” cross section, specially designed
to keep the measuring axis perpendicular to the pipe axis,
Dial Face perpendicular to thread axis.
Description:
This 5886-GM is used to record a measurement of groove
eccentricity. It is specially equipped with cylindrical
contact point, which enables a firm contact with the groove.
The measurement shown indicates the actual thread height
relative to the bottom of the groove. A measurement can
be made either by rotating the coupling while measuring
or by obtaining several different readings.
Меры
для высоты профиля
|