Специальные приборы для
заключительных испекционных работ
5886-S/Flank
Shave Gauge
Used
on round or V-form threads, the Flank Shave Gauge measures
and compares the difference between thread flanks and
the setting standard. The gauge is first set to the appropriate
V groove on a #6780 Shave Standard and adjusted to a zero
reading. When placed on the product, the dial indicator
will indicate flank shave.
6788/Ball
Point Wear Check Block
Determines
wear and irregularities on common ball point contacts
of .057, .062, .072 and .090 diameter.
6065-B/Multiple
Point Pencil
Three
markers spaced in 1? increments permit fast and accurate
marking of coupling threads to indicate where measurements
are to be taken.
6875/Spring
Clip
Slips
over product end to quickly identify the specific threads
where taper measurement readings are to be taken. Marking
lines at 1? intervals with lead edge marking at 1/2?.
5336-C/Saddle
Gauge
Special
V legs rest on the pipe body, allowing indicator to check
eccentricity of the upset to .001?. Leg spacing is adjustable
giving a measuring length from indicator to external leg
of 39?.
9916/Thread
Eccentricity Gauge
Allows
precise measurement of thread cone eccentricity of line-pipe,
casing and EUE tubing, relative to the pipe body. Resting
on the anvil on the threaded area and rotating the pipe
allows a quick measurement to .001?.
Profile
Gauges
Hardened
and precision ground for each of the 17 different forms
covered in API Std. 5B and Spec. 7 plus 3 H-90 forms.
Useful in identifying threaded connections, they also
help detect stretched threads, thick first threads and
rolled over threads. In some cases, one profile gauge
will check several different connections.
|